Polyroof offers a true one-stop-shop for built-up roof systems and accessories. The products listed below are just some of the items supplied by Polyroof that supplement the core range of liquid roofing systems. If you do not find what you’re looking for, please call our technical office on 0800 801 890, or email technical@polyroof.co.uk ava



Polyroof RES Insulation (T&G)


Recommend for direct-coating with the Protec System

A high performance foil-faced PIR insulation board with tongue and groove joints. This insulation can be coated directly with Protec – without the need for a carrier layer or primer, meaning extremely rapid application times. The tongue & groove board joints allow for a smooth, even finish.

[Download the Technical Datasheet]


Polyroof Balcony RES Insulation (T&G)


Recommend for direct-coating with the Protec System

Features a 3.2mm high-strength, non-compressible, puncture-resistant facing board bonded to Polyroof RES Insulation (T&G). Ideal for balcony applications, or where an extra-tough finish is required.

[Download the Technical Datasheet]


Polyroof Cut-To-Falls Insulation


Innovative bonded two-layer system featuring a cost-effective tapered base insulation layer and Polyroof RES Insulation (T&G) top layer. Polyroof will undertake a survey of the roof and produce a bespoke cut-to-falls scheme for the project.


Polyroof Tissue-Therm Insulation


Recommend for use with Polyroof SA Carrier Layer

A cost-effective tissue-faced PIR insulation board with square-edge joints that is ideal for use with the Polyroof SA Carrier Layer. Alternative applications may be available – consult Polyroof Technical Services for details.

[Download the Technical Datasheet]


Polyroof Foil-Therm Insulation


Recommend for use with Polyroof Approved Plywood or OSB3 decks

A cost-effective foil-faced PIR insulation board with square edged joints that is ideal for use under a Polyroof approved plywood or OSB3 deck. Alternative applications may be available – consult Polyroof Technical Services for details.

[Download the Technical Datasheet]


Polyroof Vacuum Insulated Panel (VIP) Insulation


Polyroof Vacuum Insulated Panel (VIP) Insulation is an ultra-thin insulation board, composed of a vacuum insulated panel core encased in a tough, high density PIR shell.

[Download the Technical Datasheet]


Rockwool Hardrock Multi-Fix (DD)


This board offers exceptional fire resistance and acoustic insulation properties. Please consult Polyroof Technical Services for specifcation details.

[Download the Technical Datasheet]


Polyroof Inverted-Therm Insulation


Polyroof’s liquid roofing systems are ideal for inverted roof designs and are BBA certified to last the design life of the roof within buried membrane configurations. Polyroof supply the full range of inverted roof insulation.

Polyroof SA Vapour Barrier


A 0.6mm high performance aluminium foil-faced vapour barrier that is suitable for high humidity conditions. Self adhesive, rapid, and fully cold-applied application.

[Download the Technical Datasheet]


Visqueen Vapour Control Layer


A cost effective 1200 gauge polythene material suitable for use as a vapour control layer within
mechanically fxed warm roof systems.


Polyroof SA Carrier Layer


A 2mm high-performance sanded faced bituminous membrane that can be used as a vapour barrier or as a carrier layer. The membrane offers excellent vapour resistance and has a self adhesive, rapid, and fully cold-applied application.

[Download the Technical Datasheet]


Polyroof SA Primer (Roller Applied)


Polyroof SA Primer (roller applied) is solvent based primer for bonding a Polyroof SA Vapour Barrier and Polyroof SA Carrier Layer to variety of substrates. The roller applied version is ideally suited for small to medium sized projects

[Download the Technical Datasheet]


Polyroof SA Primer (Spray Applied)


With a very fast application, Polyroof SA Primer (spray applied) is solvent based primer for bonding a Polyroof SA Vapour Barrier and Polyroof SA Carrier Layer to variety of substrates. The spray applied version is ideally suited for larger sized projects.

[Download the Technical Datasheet]


Spray Gun (For Polyroof SA Primer)


A spray gun for use with Polyroof SA Primer (Spray Applied).


3.6m PTFE Braided Hose


Attaches the spray or foam gun to the cannisters.

Cleaning Adaptor


Used in conjunction with the Polyroof Cleaning Aerosol to clean the 3.6m PTFE Braided Hose and the spray / foam guns after use.

[Download the Guidance Sheet]


Polyroof Cleaning Aerosol


Used in conjunction with the Cleaning Adapter to clean the 3.6m PTFE Braided Hose and the spray / foam guns after use.

[Download the Guidance Sheet]

Polyroof Twin-Pack Insulation Adhesive


Polyroof Twin Pack Insulation Adhesive is a high foaming rapid curing two component polyurethane adhesive. This insulation is required for foil-to-foil applications (e.g. Polyroof RES Insulation to Polyroof SA Vapour Barrier)

[Download the Technical Datasheet]


Polyroof Single-Pack Insulation Adhesive


Polyroof Single Pack Insulation Adhesive a cost effective single component, moisture curing polyurethane adhesive applied from a 22L (17kg) canister to provide accurate application. This adhesive is not suitable for foil-to-foil applications

[Download the Technical Datasheet]


Polyroof Twin-Pack Adhesive Gun


A battery operated application gun for Polyroof Twin-Pack Insulation Adhesive.


Foam Gun (For Polyroof Single-Pack Adhesive)


A foam gun for use with Polyroof Single-Pack Adhesive


3.6m PTFE Braided Hose


Attaches the spray or foam gun to the cannisters.


Cleaning Adaptor


Used in conjunction with the Polyroof Cleaning Aerosol to clean the 3.6m PTFE Braided Hose and the spray / foam guns after use.

[Download the Guidance Sheet]


Polyroof Cleaning Aerosol


Used in conjunction with the Cleaning Adapter to clean the 3.6m PTFE Braided Hose and the spray / foam guns after use.

[Download the Guidance Sheet]


EJOT TKR Range


Mechanical fxings for metal deck and timber deck constructions. Can be used with HTK plastic tube washers.


EJOT TKE Range


A4 stainless steel mechanical fxings for metal deck and timber decks. Can be used with HTK plastic tube washers.


EJOT HTK Plastic Tube Washers


50mm face. For use with TKR & TKE ranges


EJOT FBS-R Range


Mechanical fxings for concrete deck constructions. Can be used with Ecotek plastic tube washers


EJOT FPS-E Range


Mechanical fxings for aerated concrete deck constructions. Can be used with Ecotek plastic tube washers


EJOT Ecotek Plastic Tube Washers


For use with FBS-R and FBS-E ranges.


EJOT Stress Plates


Comprehensive range available.


EJOT Drill Bits & Driver Bits


Comprehensive range available.



Bespoke Rooflights & Surveys


For the client’s complete peace of mind, a site survey is recommended for rooflight projects. Polyroof will arrange a site survey and produce a bespoke rooflight scheme tailored to the client’s exact requirements.


PR Rooflight Kerb – Type A


For use with flat board insulation

Add vertical risers to suit the depth of insulation specifed – as standard supplied with a 130mm vertical attachment to ensure a good interface between board insulation and the rooflight kerb.

Standard roof opening sizes (mm): 600 x 600, 750 x 750, 800 x 800, 850 x 850, 900 x 900,
1000 x 1000, 1050 x 1050, 1100 x 1100, 1200 x 1200

[Download the Technical Datasheet]


PR Rooflight Kerb – Type B


For use with Polyroof Cut-to-Falls Insulation

Add vertical risers to suit the maximum depth of the tapered insulation scheme.

Standard roof opening sizes (mm): 600 x 600, 750 x 750, 800 x 800, 850 x 850, 900 x 900,
1000 x 1000, 1050 x 1050, 1100 x 1100, 1200 x 1200

[Download the Technical Datasheet]


PR Rooflight Kerb – Type C


A standard rooflight kerb.
Splayed or Vertical Kerb 160mm high.

Standard roof opening sizes (mm): 600 x 600, 750 x 750, 800 x 800, 850 x 850, 900 x 900,
1000 x 1000, 1050 x 1050, 1100 x 1100, 1200 x 1200

[Download the Technical Datasheet]


PR Rooflight Kerb – Type D


A standard rooflight kerb.
Fixing direct to an existing or new builders kerb.

Standard roof opening sizes (mm): 600 x 600, 750 x 750, 800 x 800, 850 x 850, 900 x 900,
1000 x 1000, 1050 x 1050, 1100 x 1100, 1200 x 1200

[Download the Technical Datasheet]


PR Rooflight Kerb – Type E


160mm high for fxing to the of a newly constructed timber ground equal to or greater than the
depth of the new insulation.

Standard roof opening sizes (mm): 600 x 600, 750 x 750, 800 x 800, 850 x 850, 900 x 900,
1000 x 1000, 1050 x 1050, 1100 x 1100, 1200 x 1200

[Download the Technical Datasheet]


PR Rooflight Kerb – Type F


“Sleeving Over” existing rooflight kerbs or protrusions in refurbishment situations
Vertical risers are added to ensure the ventilation modules and or glazing do not foul the existing protrusions. For these applications we would recommend taking advantage of our site survey service.

Standard roof opening sizes (mm): 600 x 600, 750 x 750, 800 x 800, 850 x 850, 900 x 900, 1000
x 1000, 1050 x 1050, 1100 x 1100, 1200 x 1200

[Download the Technical Datasheet]


PR Rooflight Kerb – Type G


Variable height using uPVC plugins for fxing to an existing builders kerb or plinth.

Standard roof opening sizes (mm): 600 x 600, 750 x 750, 800 x 800, 850 x 850, 900 x 900,
1000 x 1000, 1050 x 1050, 1100 x 1100, 1200 x 1200

[Download the Technical Datasheet]


Hit and Miss Vent


Provides minimal background ventilation and is controlled by means of a small sliding shutter over slots in the kerb wall protected by the weather edge.

[Download the Technical Datasheet]


Rota Vent


Unique all PVCu “hopper” ventilator directs the airflow upward to reduce the risk of condensation forming on the glazing as well as preventing down draughts. The vent openings are fully protected reducing the risk of moisture, wind blown debris or grit entering the building.

[Download the Technical Datasheet]


Manually Operated Worm Gear Vent


The whole rooflight top hinges open on a continuous co-extruded PVCu hinge to allow large areas of ventilation through the open area.

[Download the Technical Datasheet]


Electrically Operated Chain Drive Motor


230 or 24 volt motor drives the unit open to provide large areas of ventilation through the opening.

[Download the Technical Datasheet]



18mm Polyroof Approved Plywood


Polyroof approved plywood achieves compliance with Building Regulations (through BBA approval, meeting requirements of BS5268 Part 2 or ETA certifed), CE Marked Structural 2+ with a high quality face veneer featuring an open grain structure allowing for excellent resin adhesion.


18mm OSB3 TG4


Polyroof approved OSB3 TG4E achieve compliance with Building Regulations by meeting the requirements of BS EN 300 and achieves BBA Certifcation. The boards are CE marked (Structural 2+) and satisfy the requirements of the Construction Products Regulation (CPR).


18mm OSB3 Square Edged


Polyroof approved OSB3 TG4E achieve compliance with Building Regulations by meeting the requirements of BS EN 300 and achieves BBA Certifcation. The boards are CE marked (Structural 2+) and satisfy the requirements of the Construction Products Regulation (CPR).


Polyroof High Density PIR Recovery Board


Polyroof High Density PIR Recovery Board is a 15mm thick square edged, tissue faced board, with exceptional compressive strength.

[Download the Technical Datasheet]


Rockwool Hardrock Multi-Fix Recovery Board


HARDROCK® Multi-Fix Recovery Boards are completely fire safe and can be used to provide an effective acoustic barrier to external noise pollution. Used in conjunction with Polyroof SA Carrier Layer.

[Download the Technical Datasheet]


Polyroof SA Lighting Conductor Clips


Supplied in one piece with a self-adhesive backing for easy installation. Features a recessed rivet to protect the membrane from damage. Accommodates a conductor strip up to 25mm wide, 5mm thick and is supplied with a 100mm x 75mm flange

[Download the Technical Datasheet]


Polyroof Structural Repair Mortar


A single component, cementitious mortar that, because of its enhanced polymer properties, is rapid hardening, low density, and high strength. The thixotropic nature of the mortar enables easy, high build trowel application for structural repairs. Polyroof Structural Repair Mortar is supplied ready for on-site mixing and application, requiring only the addition of clean water

[Download the Technical Datasheet]


Polyroof Butyl Lap Tape


Polyroof Butyl Lap Tape is a self-adhesive butyl rubber compound tape, strengthened with a polypropylene fleece.

[Download the Technical Datasheet]


Polyroof Butyl Bolt Tape


Polyroof Butyl Bolt Tape is a self-adhesive butyl rubber compound tape with a paper release backing.

[Download the Technical Datasheet]